![]() |
MOQ: | 1 set |
Price: | USD1,000-700,000. Based on customization. |
Standard Packaging: | Industrial plastic film wrapping, secured with steel wire. |
Delivery Period: | 30 days |
Payment Method: | L/C,T/T |
Supply Capacity: | 30 sets per month |
1.1 Production Line | ||
This roll forming production line targets metal roofing manufacturers producing gutters and ridge caps. It offers cost-effective, dual-profile capability with chain-driven stability and safety features. Ideal for mid-sized operations seeking reliable, flexible roofing accessory production with enhanced efficiency and maintenance ease. |
1.2 Profile | |
The profiles are cold-rolled steel, typically 0.5 to 1.0 mm thick, shaped into gutter and ridge cap cross-sections. Featuring durable corrosion-resistant coatings, precise dimensions, and smooth edges, these profiles ensure effective roof water drainage and sealing, suitable for residential and commercial metal roofing systems. | |
Material: Galvanized Steel / PPGI / Aluminum | Thickness: 0.3-0.8mm |
Yield strength: 200 - 350 Mpa | Tensil stress: 200 -350 Mpa |
![]() |
![]() |
1.3 Production Process | |
Flow Chart: Hydraulic Decoiler → Entry Guide → Roll Former → Hydraulic Cutter → Run-out Table |
|
![]() |
|
Process: The double-lane roll former uses chain-driven systems for precise, stable forming of gutters and ridge caps. Chain covers enhance safety and reduce maintenance. Hydraulic cutters ensure clean, accurate profile lengths. This setup supports simultaneous multi-profile production, increasing efficiency. |
1.4 Key Focus | |
Dual-lane design maximizes production efficiency for gutter and ridge cap profiles. |
|
Chain-driven roll former offers reliable, consistent forming with reduced mechanical wear. |
|
Safety chain covers protect operators and extend machine lifespan. |
|
Hydraulic cutter delivers precise, burr-free cuts for superior product quality. |
|
Cost-effective solution balancing performance and investment for roofing accessory manufacturers. |
2.1 Decoiler | ||
Structure | Double-support | ![]() |
Working Form | Manual, motorized, or hydraulic | |
Loading Capacity | 5T/7T/10T, customizable | |
Coil Width | 1250mm, customizable | |
Inner Diameter | Φ450 – Φ550 mm | |
Out Diameter | 1500 mm | |
Model | DC-MU1 |
2.2 Optional Upgrade: Decoiler | ||
![]() |
![]() |
![]() |
Motorized Decoiler | Stand structure decoiler, motorized or hydraulic | Hydraulic decoiler with loading car |
2.3 Guiding Device With Pre-Cut Broaching Shear | ||
Guiding Roller | Adujust the coil feeding width | ![]() |
Pre-cut Broaching Shear | Cut the steel coil before roll forming | |
Digital Display | See the feeding width directly |
2.4 Roll Forming Machine | ||
Working Speed | Around 20 m/min | ![]() |
Structure | Wall panel type. Optional: Cast-iron stands or guide pillar | |
Driving System | Chain system. Optional: Gearbox | |
No. of Forming Stations | 18 stands | |
Shaft Diameter | 70mm solid shaft | |
Motor Power | 5.5 Kw | ![]() |
Roller Material |
45# steel polished and chromed HRC58-62° |
|
Shaft Material | High grade 45# steel polished(CNC lathe) | |
Steel Coil Material | PPGI or GI | |
Steel Coil Thickness | 0.25-0.8mm |
2.5 Optional Upgrade: Cover | ||
![]() |
![]() |
![]() |
Mounted On The Inside: No Cover Required | Solid Cover For Chain | Mesh Safety Cover |
2.6 Cutter | ||
Common Power Type | Hydraulic. Optional: motor type. | ![]() |
Hydraulic Power |
4-5.5Kw, customizable |
|
Blade Material |
Cr12 Mov |
|
Hardness |
With quenched treatment HRC 58 – 62° |
2.7 Product Collection | |||
Solution 1 |
Run-out table |
Solution 2 | Auto stacker |
Power Type |
Non-powered, mainly manual handling |
Power Type | Motorized, 3Kw |
Dimension | Length 4m, customizable | Dimension | Length 4m-6m, customizable |
![]() |
![]() |
2.8 PLC Control Cabinet | |||
PLC Brand | Delta, customizable | Power Supply | 380v, 50HZ, 3Phase (It depends on customer requirement) |
Encoder Brand | Omron, customizable | Language | Chinese + English, Spanish, French, Russian, etc |
Touch Screen | MCGS, customizable | Operation type | Manual /auto two-type switch |
Hanging Arm Type | Saving Space | Standing Type | greater component integration and flexible positioning |
Hanging-Arm Control Box |
Standing Control Box |
2.9 Hydraulic Power Unit (HPU) | ||
Motor Power |
5.5Kw | ![]() |
Oil Required |
N32 or N46 hydraulic oil is available |
|
Design |
The hydraulic station has a fan cooling system |
|
Optional |
It can be installed on or inside the roll former to save space |
2.10 Analysis | |
5T Manual Decoiler | Supports up to 5 tons coil weight, low investment cost |
Manual control allows flexible coil size adjustment | |
Guiding | Ensures precise steel coil alignment before forming |
Minimizes material deviation, improves product quality | |
Roll Former | Double lane design for simultaneous gutter and ridge cap |
Chain drive provides stable, consistent forming power | |
Chain cover protects operator and machine from damage | |
Hydraulic Cutter | Powerful hydraulic system enables clean, precise cutting |
Adjustable cut length accommodates different profile sizes | |
Out Table | Provides stable product support and smooth discharge |
Designed for easy manual or automated product handling |
Component | Quantity |
Manual Decoiler | 1 set |
Roll Former | 1 set |
Hydraulic Cutter | 1 set |
Out Table | 2 sets |
PLC Cabinet | 1 set |
Hydraulic Station | 1 set |
This roll forming line can be customized for different gutter and ridge cap sizes, thicknesses from 0.3mm to 0.8mm, and coating types. Optional features include automated decoiler upgrades, variable hydraulic cutter lengths, and enhanced chain guard designs. We tailor configurations to meet specific profile dimensions and production speed requirements.
![]() |
MOQ: | 1 set |
Price: | USD1,000-700,000. Based on customization. |
Standard Packaging: | Industrial plastic film wrapping, secured with steel wire. |
Delivery Period: | 30 days |
Payment Method: | L/C,T/T |
Supply Capacity: | 30 sets per month |
1.1 Production Line | ||
This roll forming production line targets metal roofing manufacturers producing gutters and ridge caps. It offers cost-effective, dual-profile capability with chain-driven stability and safety features. Ideal for mid-sized operations seeking reliable, flexible roofing accessory production with enhanced efficiency and maintenance ease. |
1.2 Profile | |
The profiles are cold-rolled steel, typically 0.5 to 1.0 mm thick, shaped into gutter and ridge cap cross-sections. Featuring durable corrosion-resistant coatings, precise dimensions, and smooth edges, these profiles ensure effective roof water drainage and sealing, suitable for residential and commercial metal roofing systems. | |
Material: Galvanized Steel / PPGI / Aluminum | Thickness: 0.3-0.8mm |
Yield strength: 200 - 350 Mpa | Tensil stress: 200 -350 Mpa |
![]() |
![]() |
1.3 Production Process | |
Flow Chart: Hydraulic Decoiler → Entry Guide → Roll Former → Hydraulic Cutter → Run-out Table |
|
![]() |
|
Process: The double-lane roll former uses chain-driven systems for precise, stable forming of gutters and ridge caps. Chain covers enhance safety and reduce maintenance. Hydraulic cutters ensure clean, accurate profile lengths. This setup supports simultaneous multi-profile production, increasing efficiency. |
1.4 Key Focus | |
Dual-lane design maximizes production efficiency for gutter and ridge cap profiles. |
|
Chain-driven roll former offers reliable, consistent forming with reduced mechanical wear. |
|
Safety chain covers protect operators and extend machine lifespan. |
|
Hydraulic cutter delivers precise, burr-free cuts for superior product quality. |
|
Cost-effective solution balancing performance and investment for roofing accessory manufacturers. |
2.1 Decoiler | ||
Structure | Double-support | ![]() |
Working Form | Manual, motorized, or hydraulic | |
Loading Capacity | 5T/7T/10T, customizable | |
Coil Width | 1250mm, customizable | |
Inner Diameter | Φ450 – Φ550 mm | |
Out Diameter | 1500 mm | |
Model | DC-MU1 |
2.2 Optional Upgrade: Decoiler | ||
![]() |
![]() |
![]() |
Motorized Decoiler | Stand structure decoiler, motorized or hydraulic | Hydraulic decoiler with loading car |
2.3 Guiding Device With Pre-Cut Broaching Shear | ||
Guiding Roller | Adujust the coil feeding width | ![]() |
Pre-cut Broaching Shear | Cut the steel coil before roll forming | |
Digital Display | See the feeding width directly |
2.4 Roll Forming Machine | ||
Working Speed | Around 20 m/min | ![]() |
Structure | Wall panel type. Optional: Cast-iron stands or guide pillar | |
Driving System | Chain system. Optional: Gearbox | |
No. of Forming Stations | 18 stands | |
Shaft Diameter | 70mm solid shaft | |
Motor Power | 5.5 Kw | ![]() |
Roller Material |
45# steel polished and chromed HRC58-62° |
|
Shaft Material | High grade 45# steel polished(CNC lathe) | |
Steel Coil Material | PPGI or GI | |
Steel Coil Thickness | 0.25-0.8mm |
2.5 Optional Upgrade: Cover | ||
![]() |
![]() |
![]() |
Mounted On The Inside: No Cover Required | Solid Cover For Chain | Mesh Safety Cover |
2.6 Cutter | ||
Common Power Type | Hydraulic. Optional: motor type. | ![]() |
Hydraulic Power |
4-5.5Kw, customizable |
|
Blade Material |
Cr12 Mov |
|
Hardness |
With quenched treatment HRC 58 – 62° |
2.7 Product Collection | |||
Solution 1 |
Run-out table |
Solution 2 | Auto stacker |
Power Type |
Non-powered, mainly manual handling |
Power Type | Motorized, 3Kw |
Dimension | Length 4m, customizable | Dimension | Length 4m-6m, customizable |
![]() |
![]() |
2.8 PLC Control Cabinet | |||
PLC Brand | Delta, customizable | Power Supply | 380v, 50HZ, 3Phase (It depends on customer requirement) |
Encoder Brand | Omron, customizable | Language | Chinese + English, Spanish, French, Russian, etc |
Touch Screen | MCGS, customizable | Operation type | Manual /auto two-type switch |
Hanging Arm Type | Saving Space | Standing Type | greater component integration and flexible positioning |
Hanging-Arm Control Box |
Standing Control Box |
2.9 Hydraulic Power Unit (HPU) | ||
Motor Power |
5.5Kw | ![]() |
Oil Required |
N32 or N46 hydraulic oil is available |
|
Design |
The hydraulic station has a fan cooling system |
|
Optional |
It can be installed on or inside the roll former to save space |
2.10 Analysis | |
5T Manual Decoiler | Supports up to 5 tons coil weight, low investment cost |
Manual control allows flexible coil size adjustment | |
Guiding | Ensures precise steel coil alignment before forming |
Minimizes material deviation, improves product quality | |
Roll Former | Double lane design for simultaneous gutter and ridge cap |
Chain drive provides stable, consistent forming power | |
Chain cover protects operator and machine from damage | |
Hydraulic Cutter | Powerful hydraulic system enables clean, precise cutting |
Adjustable cut length accommodates different profile sizes | |
Out Table | Provides stable product support and smooth discharge |
Designed for easy manual or automated product handling |
Component | Quantity |
Manual Decoiler | 1 set |
Roll Former | 1 set |
Hydraulic Cutter | 1 set |
Out Table | 2 sets |
PLC Cabinet | 1 set |
Hydraulic Station | 1 set |
This roll forming line can be customized for different gutter and ridge cap sizes, thicknesses from 0.3mm to 0.8mm, and coating types. Optional features include automated decoiler upgrades, variable hydraulic cutter lengths, and enhanced chain guard designs. We tailor configurations to meet specific profile dimensions and production speed requirements.