|
Product Details:
Payment & Shipping Terms:
|
| High Light: | z purlin roll forming machine,c purlin roll forming machine |
||
|---|---|---|---|
45# Steel Steel Profile Roll Forming Machine For Colored Galvanized Steel Sheet
Introduction
The steel purline is processed by cold bending of hot rolled plate, the wall is thin and light, the section has good performance and high strength, and the material is q195-345.
Common steel purlins have Z - shaped steel purline and C - shaped steel purline.
The steel purline is the secondary bearing member in the roof structure system, which carries the roof load to the steel frame.
Main specification
| Model Number | C purlin, 80-300 |
| Suitable Material | hot rolled strip steel, Q235 or equivalent, 1.5-3.0 mm thickness |
| Material Width | 175-465 mm |
| Dimension | about 10.0*1.2*1.75 m (L*W*H) |
| Working Space | about 20.0*2.7 m (L*W) |
| Length Of Sheet | You can set the length according to your need, such as 1.5m, 3.2m or 6.7m. It is controlled by PLC, and can ensure the accuracy of 2mm. |
| Cutting | Automatically stop and cutting when it comes to the set length |
| Forming Speed | 0-15 m/min |
| b. Components Details | |
| Material | Gr15. Treating process: rough turning-quenching, 62-64,C-finish turning-accurate grinding- polishing- hard chrome plating, 0.05 mm |
| Main Frame | 400 H steel. More stable, no shaking |
| Middle Plate | 20 mm. we use bigger plates, to ensure stability |
| Chain | 2 inch thickness |
| Shaft Material | 80 mm, high grade 45# steel. Treating process: tempering- finish turning, high rigidity, hard to deform. |
| Forming Steps | 13 |
| Detailed Forming Process | 3 steps for leveling- 12 steps for roll forming-5 steps for adjusting height and width-1 step on the coil-output part for adjusting deviation-1 leveling step to make it straight. |
| Mold Cutting | Cr12, hardness HRC60-62. Treating process: heat treatment- plane abrasion- wire electrode cutting |
| Control System | Suitable power: 380V, 50 Hz, 3 phase or according to your need. |
| Screen: Delta 7 inch touch screen, easy to operate | |
| PLC: Delta DVP24ES, well-adapted to various conditions, such as moisture, electromagnetic disturbance. | |
| Frequency converter, Delta VFD-M. It has the advantage of slowing down before cutting, to ensure the length accuracy ( 1mm, far better than industrial standard 3mm). | |
| Length measurement device: Omron, made in Japan. It features with high accuracy and stability | |
Advantage
1. We use Automatic control software to manage productive information.
2. Thanks to the High integrated network, the whole automatic control system has an improvement in automaticity.
3. High performance in operation, maintenance, and debugging. Easy to load and unload.
4. First in quality
5. First in time
6. First in price
7. First in services
Contact Person: Ms. Emma Teng
Tel: +8613921262246
Fax: 86-510-86952138
