|
Product Details:
Payment & Shipping Terms:
|
| Name: | Large Span Roll Forming Machine | Material: | PPGI |
|---|---|---|---|
| After Sale Service: | Engineer Served Overseas | Use: | Roof |
| Color: | Optional | ||
| Highlight: | roll former machine,roof tile roll forming machine |
||
High efficiency large span roll forming machine
Working flow
This whole line is consisted of Hydraulic De-coiling (5tons) , Flatting device + Feeder by servo motor control + Hydraulic punching with holes punching moulds, Roll forming, Cutting, Run-out table.
Technical parameters of the roll forming machine
|
1.
Hydraulic De-coiler : |
||
|
Capacity |
Max load 5000kg | |
|
De-coiler mode |
Inner extending cantilever style, hydraulic control, single head style |
|
|
Coil width (Max.): |
1200mm |
|
|
Max steel coil diameter |
1300mm |
|
|
Motor power |
5.5KW |
|
|
Inter diameter: |
480mm-520mm |
|
|
Working speed: |
0-15m/min |
|
|
2. Flatting device + Feeder by servo motor control ---- Hydraulic punching with holes punching moulds |
||
|
Material Guiding device |
According to raw material width |
|
|
feeding roller diameter |
Material 40CR, HRC48-52. ￠80mm, |
|
|
Driving mode |
Servo motor control by CNC control Servo motor: 4KW |
|
|
Hydraulic station power |
11kw; 25MPA |
|
|
Moulds material |
Cr12, hardness 58°-62° after treating 30times/second |
|
|
Punching & cutting moulds |
2 sets |
|
|
Main Roll Forming Machine |
||
|
Roll Formed Profile Type: |
Roof panel |
|
|
Suitable raw material: |
Q235A galvanized steel sheet |
|
|
Raw material thickness |
0.8-1.8mm |
|
|
Raw material width |
|
|
|
Line structure |
Portal-type frame style: 45# steel |
|
|
Forming Roller Stations: |
14 Stations |
|
|
Forming Roller shaft: |
¢90mm, 45#, treating |
|
|
Forming rollers |
GCr15, quenching, hardness HRC56-62º, chrome plated |
|
|
Forming Speed: |
0-15m/min |
|
|
Main motor: |
15kw |
|
|
Driving mode: |
By chain, main gearing box BWD14-43-15KW |
|
|
Power supply |
3 x AC380V, 50HZ, |
|
|
Cutter |
||
|
Type |
Hydraulic Shearer |
|
|
Cutting moulds |
Cr12, quenching, hardness HRC56-62º, |
|
|
Cylinder diameter |
120mm, 16MPA, 300mm working distance |
|
|
Electrical system |
||
|
Control mode |
PLC, Frequency control, speed adjustable, |
|
|
power |
3xAC380v, 50HZ |
|
|
Interface |
Touch screen operation |
|
Panel Bending Machine
This is three rollers bending machine, consisted of driving motor, three forming rollers, PLC control system, etc.
Main Parameters
1．Rolling material(㎜):0.8-1.8mm
2．Working speed: 0-20strokes/min
3．Main Motor power；4KW
3．Hydraulic station: 15KW, 25MPA:
5．Punching moulds: 40Cr, hardness HRC55-60
6．Control system: YASKAVA servo system (4kw)
7. Bending mode and direction: 2wave/stroke; down direction
9. Max bending length 2.8m
10．Sizes: 3000×1400×1400mm
1. Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
2. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your
machines running in order to keep your business running.
3. How to visit your company?
Fly to Shanghai Airport, then we can pick up you, spend less than 2 hours can arrive our factory.
4. What can you do if the machine broken?
Our machine's warranty period is 12months,if the broken parts can't repair,we can send the new parts replace the
broken parts freell,but you need pay the express cost yourself.if after warranty period,we can through negotiationfor
to solve the problems,and we supply the technical support for the whole life of the equipment.
5. Can you be responsible for transport?
Yes,please tell me the destination port or address.we have rich experience in transport.
Contact Person: Ms. Emma Teng
Tel: +8613921262246
Fax: 86-510-86952138
