|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Galvanized Steel Cable Tray Roll Forming Machine | Roller Material: | Gcr15 |
|---|---|---|---|
| Shaft Material: | 45# Steel | Main Motor Power: | 11KW |
| Punching Press: | 80Tons | Forming Speed: | 10-15m/min |
| Roller Stations: | 14 Stations | Raw Material: | CR/GI |
| High Light: | cable tray making machine,cable tray production line |
||
Galvanized Steel Perforated Cable Tray Cable Ladder Roll FormingMachine Panasonic PLC Control
Main feature
The cable ladder cable tray rol forming line is a duplex and high performance production line for manufacture C section cable trays profile with slotted holes for supporting electric wiring in commercial and industrial construction. The cable tray which was produced by cable tray roll forming machine usually made from middle gauge steel thickness from 0.8~2.0mm.
Working flow
Uncoiling---Leveling---Storage---Feeding---Punching and Cutting---Roll forming---Output table
Technical parameters
1, Diameter: 420-560mm hydraulic expansion.
2, Size adjustment: Automatic adjustment
3, Servo feeding motor: About 4.4KW
4, Press machine: 80tons (or hydraulic punching)
5, Punching mould material: Cr12mov
6, Material thickness: 1.0-2.5mm
7, Raw material: CR / HR
8, Forming speed: 10-15meters / min
9, Line speed: 4-6m/min
10, Forming stations: 14 stations
11, Material of roller: Gcr15, Quench HRC58-62 Plated Chrome
12, Material of shaft: 45# Steel
13, Shafts diameter: 76mm
14, Driven system: Chain driven
15, Main power: 11kw
16, Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requirement)
17, Material of blade: Cr12Mov, Quench HRC58-62
18, Tolerance of length: +-1.5mm
Main components
| COMPONENT FOR Cable Tray Roll Forming Making Machine Line | ||
| Name | Units | Quantity |
| Decoiler | Set | 1 |
| Punching press | Set | 1 |
| Feeding device | Set | 1 |
| Roll forming system | Set | 1 |
| Cutting Equipment | Set | 1 |
| Electric control system | Set | 1 |
| Supporter/Automatic Stacker | Set | 1 |
Profile drawing
Product application
Our service
Designing:
After order confirmation, we start to design the machine, such as the basement, structure, rollers, shafts, power, cutting device, programs and so on.
Making:
The main parts, like rollers and shafts are produced by ourselves. We have several high-precision CNC lathe and other kinds of new machine tools, so that the quality and precision can be controlled.
Assembling:
The machines are assembled by technicians with years of experience, which can help workers improve the production efficiency and machine’s quality.
Testing:
Raw material of different specifications are prepared for testing. And during test, long enough material is used. Because if the material is not long enough, some defects can not be exposed.
Delivery:
Machine will be fixed inside container by steel wire, in order to make sure it won’t move during transportation and avoid any kinds of damage of machine and container.
Our Advantages
> Can roll form ventilated cable trays cabble ladder cable trays from 100mm to 300mm width in one machine
> Automatic adjust the gap between the rollers for each dimension
> High precision punching holes and slots by 80 Tons high speed and high precision power press
> Low burr cutting and exact accuracy of cutting length
> All electric and hydraulic elements are selected from international famous brand
Installation and training
If buyers visit our factory and check the machine, we will teach how to install and use the machine and also train your workers / technican face to face. Without visiting, we will send you manual and video to teach you install and operate.
If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
Contact Person: Ms. Emma Teng
Tel: +8613921262246
Fax: 86-510-86952138
