|
Product Details:
Payment & Shipping Terms:
|
| Raw Material: | Galvanized Sheet | Roller Driven Type: | Chain Transmission |
|---|---|---|---|
| Control System: | PLC | Roller Material: | High-grade 45# Steel |
| Shaft Material: | High Grade No.45 Forged | Voltage: | 380V 50Hz 3phases |
| Product Name: | China Manufacturer Roll Forming Machine For Galvanized Steel CZ Purlin | Color: | Customers Requirement |
| High Light: | z purlin roll forming machine,c purlin roll forming machine |
||
Machine Moulding C Z Purlin Roll Forming Machine With Siemens PLC Control System
Main feature
The steel purline is formed by cold bending thin-walled steel in the indoor temperature, and the material will produce the cold bending effect.
It is suitable for steel structure engineering roof and wall beam etc.
Technical parameters
| Uncoiler (manual/automatic) | Weight Capacity | 3T |
| Inner Diameter | 460-520mm | |
| Outside Diameter | 1400mm | |
| Coil width | Max 600mm | |
|
Feeding and straightening device |
Pinch rollers | one pair, up and down |
| Straightening rollers | up three, down four | |
| Diameter of rollers | 75mm | |
| Roll Former | Frame type | single station |
| Forming Roller stand | about 14 Groups | |
| Shaft material | First grade 45# steel, | |
| Shaft diameter | 75mm | |
| Roller material | GCr15 | |
| Drive Type | Chain of transmission | |
| Motor |
15KW reducer with frequency control |
|
| Roll stand type |
split type, two sides forming separately |
|
| Size changing time | 15 min | |
| Automatic size changed by slide screw and angle gear which guarantee the complete synchronization and the material thickness is adjusted by eccentric distance of passive rollers. | ||
| Punching | Type | Hydraulic |
| Mould material | Cr12 | |
| Holes distance | Can be adjusted | |
|
Cutting 1 Hydraulic cutter |
Type | After-cutting, hydraulic |
| Material of mould | Cr12 | |
| Cutting tolerance | 10M+/- 2.0 mm | |
|
Cutting 2 Fly saw |
option | |
| PLC cabinet | PLC | PANASONIC |
| Length Controller | Encoder | |
| Operation | Touch Screen | |
| Transducer | Mitsubishi | |
| Hydraulic station | Power | 7.5 KW |
| Hydraulic pressure | 11 Mpa | |
| Runout Table | Non-power type | |
Main components
Decoiler,Feeding device,Roll forming system,Cut system,Hydraulic system,Electric control system,Supporter/Automatic Stacker
Machine picture
Profile drawing
Contact Person: Ms. Emma Teng
Tel: +8613921262246
Fax: 86-510-86952138
