|
Product Details:
Payment & Shipping Terms:
|
| Raw Material: | Color Steel | Roller Material: | 45# Steel |
|---|---|---|---|
| Production Capacity: | 10-15m/min | Power(W): | 78 KW |
| Voltage: | 380V 50Hz | Control System: | PLC ( Panasonic) |
| Cutting Blade Material: | Cr 12 High Grade Steel | Product Name: | Pre-Cutting Later Punching Type Cable Tray Roll Forming Machine Automatic Controlled By Panasonic PLC System |
| High Light: | cable tray making machine,cable tray manufacturing machine |
||
Pre Cutting Later Punching Type Cable Tray Machine Automatic Controlled By Panasonic PLC System
Main features
Cable tray roll forming machine is a kind of equipment for making cable tray by various material. This Cable Tray Roller Making Machine may produce the cable tray, the different sizes through the replace punching moulds to complete.Forming machine is combined and adjustable, one set of combined rollers complete all cable tray products, the change size through adjust distance of rollers to complete.
Working flow
Decoiler – Leveling – Servo Feeding – Main Roll Forming – Punching&Cutting – Run out table
Main composition of machine
This unit consists of the decoiler, ML-900 flatting, 200 punch, die, servo feeding, guider, main roll forming machine, follow cutting, cut-to-length part, recoiler, electrical control cabinet; etc.
Technical parameters
1). It can according to the need to produce the steel width
2). (60mm≤ -≤ 860mm) many kinds of specification electric cable bridges and other structure product.
3). Product speed by punching: 2.5-5m/min
4). Continuous rollforming speed: 10-15m/min
5). Material thickness: 1-2mm
6). Material require: Q235 cold roll steel
7). Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work.
Decoiler
1). Material width 860mm
2). Material weight 6000kg
3). Material outer diameter 1200mm
4). Drive power: Electromotor and speed reducer integration, 4KW frequency conversion electromotor
5). Frame type: Cantalever inner support, manual handle afterbody, pneumatic press cantalever.
Continual punching mould
1. Amount: Each kind of width specification 1 set dies, total 6 sets
2. Die require: Cr12 quench
servo feeding set
S1. Ervo electromotor power: 4.4kw
2. Multistage type feeding, memory ten group of memory functions
3. Man-machine contact surface numerical control system
4. Uses Mitsubishi servometer
Holds material (use in cushion section)
The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing
Guiding
A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets
main roll forming machine
1. Type: GY180(Extra wide)
2. Rack structure: Dragon Gate type memorial arch frame
3. Forming frame: 16 sets
4. Forming variety: Bridge frame
5. Material max width: 860mm
6. Material max thickness2.0mm
7. Forming width: 100-600mm
8. Forming height: 50-100mm
9. The diameter of the roller axis: 85mm
10. Roll mould material: Gcr15, quenching treatment: HRC58-62
11. Drive type: 30kw frequency conversion electromotor, ZQ500 Main speed reducer
Hydraulic cutting
1. Hydraulic pumping station: 5.5kw
2. Blade cuttimg, blade material Cr12, quench treatment
Electrical control
Main operation control cubicle
1) Amount: 1 set
2) Frequency conversion: 3 sets(in main control cubicle, control decoiler, flatting and roll forming machine)
3) PLC control: 1 set
4)8 inch liquid crystal touchscreens
5) All electrical element is the Mitsubishi original installation brand
4.9.2 assistant control cubicle
Amount: 3 sets (follow decoiler, flatting, roll forming machine)
Control styp: Manual handle
Produce condition
Capability: About 71.5kw
Production land area: 33m*3m
Machine Picture
FAQ
1. Does one machine can only produce one size?
Not exactly, it depends on which profile the customer want to produce.
2.Do you have after-sales technical support?
Yes,we are happy to give advice and also have skilled technicians available to maintain the machine overseas to customers’ workshop if needed.
3. You are trading company or factory?
We are Manufacturer, and we export our machine by ourselves.
4.How long the machine could be made?
Normally speaking, high precision roll forming machine could be made out with 40 working days.If you need machines in hurry, we can make it for you less than a month.
5. Do you provide customized?
Sure, we can design the machine according to the requirement and profile drawing you provide. Our engineers can offer the best professional solution to our worldwide clients.
6. May we visit your factory?
Sure,Warmly welcome to our factory at any time.
7.How to visit your factory?
By high speed train from Shanghai to East Wuxi (Wuxi Dong station), half an hour.
8.What's the warranty period?
12 months warranty period, starting from the date of the successful installation and commissioning of the equipments at the Buyer’s Installation site.
9.Can we arrange shipment?
Yes, sure, we can arrange shipment for our customers and provide door-to-door service.
Best Regards
Andy Yang
Director
Mobile/Wechat/Skype:0086 139 2126 2246
Contact Person: Ms. Emma Teng
Tel: +8613921262246
Fax: 86-510-86952138
