Two Waves Guardrail Roll Making Machinery With PLC Panasonic Control

2 Years Warranty two waves guardrail roll macking machinery with PLC panasonic control

The profile drawing

Working flow

 Main Specification
A. Manual decoiler
1) Capacity: 5ton
2) Driven type: passive
3) Loading width: MAX 800mm

4) Valid expanding range for coil inner diameter: 480-520mm
5) weight: about 600 kgs

B. Main roll forming system
1) Main motor power: 50kw
2) Separate motor reducer: 750type
3) Punching: Hydraulic pre-punching before forming,
4) Punching mould:Cr12mov
5) Hydraulic power: 7.5KW
6) Roller material: Gcr15 bearing steel and quench treatment hardness 58-62, chrome coated 0.05mm
7) Leveling rollers: 7rollers(three upper and four lower)
8) Roll forming station: 18groups
9) Diameter of main shaft: 100mm
10) Drive: Gearbox with cardan shaft
11) Raw material: Black steel or galvanized steel
12) Thickness of Raw material: 2.5-4.0mm
13) Width of Raw material: 475mm
14) Working speed:7m--10m/min(Exclude cutting time)
15) Cutting: Hydraulic cutting after forming, Auto cutting when reach the set length.
16) Cutting blade: Cr12mov
17) Cutting tolerance: +/- 1.5mm
18) Hydraulic power: 7.5KW
19) Hydraulic pressure: 30Mpa
20) Weight of machine: about 25ton
21) Size of machine: About 16000×2150×1500mm L x W x H
22) Color of machine: yellow and blue 
23) Coder: Omron
24) Control: PLC Panasonic, made in Japan. 380V 50HZ, 3 phases (Also can depend on customer need)
25) Computer operating panel: touching screen

Character of main structure
a) The structure is very strong and the appearance of the machine is beautiful because we adopt the H beam base with cast iron station for roll forming system
b) All the components of machine are from brand-famous enterprise so that they ensure the machine normal function very effectively.
c) We adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming.
d) It is very easy to install the equipment and suitable for producing in the factory.
e) Low noise with high efficiency

Photos for refer:

Certificates

Company Scene

After sales service:

1.Engineer will give free training lessons to labors in buyer’s factory. 
2.The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is       also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and           allowance of USD80 for engineer per day. 
3.During this guarantee period, we will provide spare parts without any charge in case of quality              discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will              provide the buyer spare parts at cost price. 
4.We will charge the buyer cost price of spare parts beyond 2 years and provide long-term technical      guide.