|
Product Details:
Payment & Shipping Terms:
|
| Raw Material: | Steel Coil | Warranty: | 1 Years |
|---|---|---|---|
| Voltage: | Customized (380V 50Hz 3 Phases) | Control System: | PLC ( Panasonic) |
| Production Capacity: | 10-15m/min | Material Thickness: | Maximum 4 Mm |
| Stacker: | Optional | Servo Cutting: | Optional |
| Cutting Mode: | Pre-cutting Or Cutting After Roll Forming | ||
| High Light: | 15m/min corrugated roll forming machine,15m/min Guardrail roll forming machine,CE corrugated roll forming machine |
||
Highway Guardrail Metal Roll Forming Machine
Highway Guardrail Metal Roll Forming Machine Product Features And Descriptions
Features of Two waves highway guardrail machine
Two waves highway guardrail machine can produce 2 waves guard rail which used for highway safety.
Antisepsis, anti - aging, anti - sun, high - resistance, low temperature and other characteristics, outdoor environment can be used for 10-25 years.
Product structure succinct, beautiful and practical, easy to transport, installation, good anti-theft performance, restricted by the terrain is small, for mountain, slope, bending area adaptability strong, moderate cost, suitable for large area USES.
Features of Three waves highway guardrail machine
Three waves highway guardrail machine can produce both 2 waves and 3 waves guardrail without changing. Guardrails are widely used for highway and road and bridges.
The highway guardrail is the main form of the semi-steel guardrail, which is a continuous structure supported by the main column with corrugated steel guardrails.
Collision of its vehicles, because the corrugated steel guardrail plate collision resistance and energy absorption effect, is neither easy to crashed again at the same time for personnel, vehicles and passengers have very good protection effect.
Highway Guardrail Metal Roll Forming Machine Product Parameters
| tem NO |
Description |
Offered specification |
| 1 | Roll Forming Machine |
Guardrail
|
| 2 | Material Width | According the profile |
| 3 | Rolling Speed | 12-15m/min(not include cutting & punching time) |
| 4 | Rolling Thickness | 3-4 mm |
| 5 | Control System | PLC (Panasonic) as list in the note |
| 6 | Un Coiler | 5 ton hydraulic de-coiler |
| 7 | Roller Stations | 12 stations (according the final design) |
| 8 | Leveling Station | 1 station (three rollers over four) |
| 9 | Punching | Two sets |
| 10 | Roller Material |
GCR15, HRC58-62℃ coated with chrome |
| 11 | Shaft Material and DIA | ￠100mm, material is 45# forge steel |
| 12 | Maim Motor Power | 37kw |
| 13 | Hydraulic Station Power | 5.5kw |
| 14 | Hydraulic Pressure | 16Mpa |
| 15 | Material Of Cutting | Cr12Mov quenching 58-62℃ |
| 16 | Structure Of The Stations | Guide pillar |
| 17 | Tolerance | 3m+-1.5mm |
| 18 | Electric Source |
380V, 50HZ,3 phase According to customer’s require
|
| 19 | Way Of Drive | By gearbox |
| 20 | Color Of The Machine | Yellow and blue |
| 21 | Container Need | 1 x40 feet & 1 x20 feet |
Highway Guardrail Metal Roll Forming Working flow
Uncoiler--Feeding--Punching--Leveling--Roll-forming--Hydraulic-cutting--Output table
Highway Guardrail Metal Roll Forming Machine components
Manual Decoiler x1 set
Hydraulic punching x1 set
Main roll forming machine x1 set
PLC Control System x1 set
Hydraulic cutting x1 set
Run-out table x1 set
Highway Guardrail Metal Roll Forming Picture
After sale services
1.Engineer will give free training lessons to labors in buyer’s factory.
2.The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 for engineer per day.
3.During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.
4.We will charge the buyer cost price of spare parts beyond 2 years and provide long-term technical guide.
FAQ
1. Does one machine can only produce one size?
Not exactly, it depends on which profile the customer want to produce.
2.Do you have after-sales technical support?
Yes,we are happy to give advice and also have skilled technicians available to maintain the machine overseas to customers’ workshop if needed.
3. You are trading company or factory?
We are Manufacturer, and we export our machine by ourselves.
4.How long the machine could be made?
Normally speaking, high precision roll forming machine could be made out with 40 working days.If you need machines in hurry, we can make it for you less than a month.
5. Do you provide customized?
Sure, we can design the machine according to the requirement and profile drawing you provide. Our engineers can offer the best professional solution to our worldwide clients.
6. May we visit your factory?
Sure,Warmly welcome to our factory at any time.
7.How to visit your factory?
By high speed train from Shanghai to East Wuxi (Wuxi Dong station), half an hour.
8.What's the warranty period?
12 months warranty period, starting from the date of the successful installation and commissioning of the equipments at the Buyer’s Installation site.
9.Can we arrange shipment?
Yes, sure, we can arrange shipment for our customers and provide door-to-door service.
Best Regards
Andy Yang
Director
Mobile/Wechat/Skype:0086 139 2126 2246
