Payment & Shipping Terms:
|Roller Material:||GCR15||Shaft Material:||45# Steel|
|Produce Name:||Highway Guardrail Roll Forming Machine||Main Power:||37 KW|
|Hydraulic Station Power:||7.5KW||Transmission:||Gearbox|
|Side Structure:||Memorial Arch||Voltage:||380V, 50HZ, 3 Phase(customized)|
highway guardrail roll forming machine,
steel roll former
Memorial Arch Gearbox Drive Metal Cruss Barrier Roll Forming Machine Line Speed 10m/min
The metal cruss barrier guardrail roll forming machine can be designed as two or three wave profiles in one machine, you just need to add some stations at the end of the machine. The guardrail roll forming machine composed with 5 ton manual decoile, feeding guide device, straighten and leveling device, front hydraulic punching device, roll forming machine, hydraulic cutting and auto stacker or manual stacker for finished products.
Single unrolling machine, one side can put material
Adopt automatic hydraulic system
Coil weight (Max): 5000kg
Coil dia (Max): 1600mm
Oil cylinder dia: 1200mm working pressure: 10mpa
Coil Width (Max.): 500mm
Working speed: 0-25m/min
2) Feeding and leveling system
Feed the coil into to guide wheel (can right and left adjust)
Leveling is three roller above and four roller below, quenched and chrome coated 0.05mm
3) Punching system(adjustable)
Oil cylinder dia: 140mm
Working pressure: 20mpa
Mould material: Cr12 quenched 58°-62°
Hydraulic power: 7.5kw
4) Roll forming machine
Main motor power: 37kw
Total weight: About 15tons
Drive: Gearbox driving with universal joint
Main shaft dia: 100mm material: 45 forge steel
Roller material: GCR15 quenched 58°-62°, chrome coated 0.05mm
Raw material: Black steel and galvanized steel, thickness: 2.5-3mm
Line speed: 10m/min
PLC: Panasonic, made in Japan 380V 50HZ
Computer operating panel: Touching screen
5) Cutting system
Blade material: Cr12,quenched 58°-62°
Oil cylinder dia: 250mm
Working pressure: 30mpa
|3||Main roll forming machine||1|
|5||PLC Control box||1|
(1) If installation is needed, we will dispatch technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist Liming to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
(2) If installation is needed, the buyer shall make the following preparation before arrival of technicians.
a) Position the machine in the buyer's factory.
b) Prepare necessary electric wiring.
c) Prepare material of trial running.
d) Provide labors for assistance and installation during installation.
Contact Person: Andy Yang